📲('Stingray phone tracker') 📡

👮‍♂️Stingray phone tracker👮‍♀️

-"StingRay" redirects here. For other uses, see Stingray (disambiguation).

Learn more📡



-("A Stingray device in 2013, in Harris's trademark submission.[1]

-The StingRay is an IMSI-catcher, a controversial cellular phone surveillance device, manufactured by Harris Corporation.[2]Initially developed for the military and intelligence community, the StingRay and similar Harris devices are in widespread use by local and state law enforcement agencies across Canada,[3] the United States,[4][5] and in the United Kingdom.[6][7] Stingray has also become a generic name to describe these kinds of devices.[8]

(Technology)

When operating in active mode, the Stingray device mimics a wireless carrier cell tower in order to force all nearby mobile phones and other cellular data devices to connect to it.

The StingRay is an IMSI-catcher with both passive (digital analyzer) and active (cell-site simulator) capabilities. When operating in active mode, the device mimics a wireless carrier cell tower in order to force all nearby mobile phones and other cellular data devices to connect to it.[9][10][11]
The StingRay family of devices can be mounted in vehicles,[10] on aeroplanes, helicopters and unmanned aerial vehicles.[12]Hand-carried versions are referred to under the trade name KingFish.[13]

[Active mode operations]

Extracting stored data such as International Mobile Subscriber Identity("IMSI") numbers and Electronic Serial Number ("ESN"),[14]

Writing cellular protocol metadata to internal storage

Forcing an increase in signal transmission power,[15]

Forcing an abundance of radio signals to be transmitted

Interception of

Using received signal strength indicators to direction find the cellular device,[9]

Conducting a denial of service attack.

Radio jamming for either general denial of service purposes[16][failed verification (See discussion.)] or to aid in active mode protocol rollback attacks

[Passive mode operations]

conducting base station surveys, which is the process of using over-the-air signals to identify legitimate cell sites and precisely map their coverage areas

[Active (cell site simulator) capabilities]

In active mode, the StingRay will force each compatible cellular device in a given area to disconnect from its service provider cell site (e.g., operated by Verizon, AT&T, etc.) and establish a new connection with the StingRay.[17] In most cases, this is accomplished by having the StingRay broadcast a pilot signal that is either stronger than, or made to appear stronger than, the pilot signals being broadcast by legitimate cell sites operating in the area.[18] A common function of all cellular communications protocols is to have the cellular device connect to the cell site offering the strongest signal. StingRays exploit this function as a means to force temporary connections with cellular devices within a limited area.

[Extracting data from internal storage]

During the process of forcing connections from all compatible cellular devices in a given area, the StingRay operator needs to determine which device is the desired surveillance target. This is accomplished by downloading the IMSI, ESN, or other identifying data from each of the devices connected to the StingRay.[14] In this context, the IMSI or equivalent identifier is not obtained from the cellular service provider or from any other third-party. The StingRay downloads this data directly from the device using radio waves.[19]
In some cases, the IMSI or equivalent identifier of a target device is known to the StingRay operator beforehand. When this is the case, the operator will download the IMSI or equivalent identifier from each device as it connects to the StingRay.[20] When the downloaded IMSI matches the known IMSI of the desired target, the dragnet will end and the operator will proceed to conduct specific surveillance operations on just the target device.[21]
In other cases, the IMSI or equivalent identifier of a target is not known to the StingRay operator and the goal of the surveillance operation is to identify one or more cellular devices being used in a known area.[22] For example, if visual surveillance is being conducted on a group of protestors,[23] a StingRay can be used to download the IMSI or equivalent identifier from each phone within the protest area. After identifying the phones, locating and tracking operations can be conducted, and service providers can be forced to turn over account information identifying the phone users.

[Forcing an increase in signal transmission power]

Learn more.

This section does not cite any sources.

Cellular telephones are radio transmitters and receivers much like a walkie-talkie. However, the cell phone communicates only with a repeater inside a nearby cell tower installation.

DU Recorder,